Current position:Home > Product Center > Hand bag > Plastic film tote bag

Plastic film hot stamping tote bag

Product introduction
An exquisite plastic film hot stamping tote bag, hot pressed tote bag with side bottom punching, a piece of white cardboard is added to the bottom of the bag body to increase the weight of the product.

model:Bronzing LOGO

category: Punching portable

  • Product details

The commonly used PO plastic film bronzing handbags are mostly made of polypropylene film, which is non-toxic, so it can be used to hold handbags.




HDPE--High Density Polyethylene



High-density polyethylene, referred to as HDPE. It is polymerized by low pressure, so it is also called low pressure polyethylene. It is milky white with poor surface gloss. The film can be processed by blow molding method and T die extrusion process. It is heat-resistant and steam-boiled, cold-resistant and freeze-resistant, has good moisture-proof, gas-proof and insulating properties, and is not easy to be damaged. Its strength is twice that of LDPE.




Nowadays, the bronzing LOGO equipment is developing again and again, so the bronzing has the characteristics of rapid drying, that is, the bronzing is quickly attached to the material after being transferred to the printing material to meet the beautiful requirements of the equipment to achieve the bronzing.




When the hot stamping and materials are attached to each other, the cloth should be pulled hard at the beginning to prevent the LOGO from being stuck. During the hot stamping process, the temperature must be mastered, and the machine hot stamping should be adjusted according to different material thicknesses to better guarantee Printing quality and ergonomics.




It is required that the hot stamping cannot overlap with the printing plate multiple times, and cannot move the printing plate, otherwise the LOGO will not appear in the play. This will produce a lot of waste. After mastering the hot stamping, the conjunctiva is firm, does not fade after printing, and can produce light after printing. The hot stamping of transparent materials will appear more beautiful, the materials of various colors should have a certain hiding power, and after overprinting, the hot stamping of overprinting should maintain the original basic color characteristics.




The customized requirements can be as follows:




[Thickness]: 11C




[Product name]: PO plastic film hot stamping bag




[Name]: Bronzing and punching tote bag




[Material]: PO




[Process]: Machine blowing, hot stamping and pad printing.




[Product size]: The size of the bag body can be customized according to customer requirements




[Color]: green, can be customized according to your requirements




[Suitable]: Used for storage and advertising




[Suitable for enterprises]: advertising bags, environmental protection bags, shopping bags, handbags, outdoor packaging bags for companies




[Packing method]: 50 bundles, 800-1200 packing




[Minimum order quantity]: 10000PCS